specifications subject to change without notice. dimensions (mm). see appendix a for recommended power cord. see pdi full line catalog for detailed specifications on power cords. fused with distance switch, iec 60320 power inlet socket with fuse/s (5x20mm) hgn-367a mechanical dimensions features the hgn-367a series line filters feature an iec connector with an integral fuse holder and distance switch; available for one or two 5 x 20mm fuses. (iec 601 prescribes fusing both lines.) fully enclosed metal housing prevents input of high frequency noise and protects ultra-sensitive equipment. these filters are also available for medical equipment with low leakage current. a ground choke can be added to enhance the grounding ability of the circuit. a bleeder resistor can also be added to prevent excessive voltages from developing across the filter capacitors when there is no load. applications computer & networking equipment, measuring & control equipment, data processing equipment, laboratory instruments, switching power supplies, other electronic equipment. technical data filter ? rated voltage: 125/250vac ? rated current: 1a, 2a, 3a, 4a, 6a, 8a, 10a ? power line frequency: 50/60hz ? max. leakage current each line to ground: @ 250vac 50hz: 0.5ma @ 250vac 50hz: 2 a* ? hipot rating (one minute) line to ground: 2250vdc line to line: 1450vdc ? temperature range: -25c to +85c switch ? rated voltage: 250vac ? rated current: 8a ? temperature range: -10c to +60c ? spst * medical application (unit: mm) recommended panel cutout (mounting from front) 2x 3.5 36.0 28.5 31.2 typ. recommended switch layout 20 2x m3x0.5 44 36 28.3 33 31 2x 3.6 4 20 49.5 20 3 + - 18 awg, ul1015 105 c, blue h.s. tubing 125 c, 600v black 18 awg, ul1015 105 c, brown 51 42.6 31.0 73 145 algonquin parkway, whippany, nj 07981 ? 973-560-0019 ? fax: 973-560-0076 e-mail: filtersales@powerdynamics.com ? www.powerdynamics.com
current rating (a): = 01 = 02 = 03 = 04 = 06 = 08 = 10 terminal: = q = s fuse option: = 1 = 2 ? quick connect solder 1 fuse (5x20mm) 2 fuse (5x20mm) hgn-367a series example & ordering code 6.3/0.25 a schematics medical schematics 1 2 3 * vde submitted 8.0 3.0 -3.6l 6.6 2.0 -3.0l s options: = 0 = 5 = 6 = 7 = 8 = 9 no bleeder resistor & no ground choke bleeder resistor (1/4 w, 1m) bleeder resistor (1/2 w, 1m) bleeder resistor (1/4 w, 1m) & ground choke bleeder resistor (1/2 w, 1m) & ground choke ground choke (100 h) component locations: = 1 = 2 ? = 3 ? = 1m = 2m ? standard type with c(x) & c(y) behind l without c(x); c(y) only without c(y); c(x) only without c(y); c(x) behind l attenuation code table: non-medical applications, select attenuation code with corresponding component values from the table. = a = b = c = d = e = f = g = h = i = j = k = m1 = m2 = m3 = m4 = m5 = m6 = m7 = m8 = m9 type of mounting: = blank = t = s flange mount snap-in tabs - top bottom snap-in tabs - side c x load l mh l mh cy l l' n' g' cy r line l n fuse fuse g lg c x l mh l mh l load cy l' n' g' cy line l n fuse fuse g lg r load l mh l mh cy l l' n' g' cy line l n fuse fuse g lg r c x load l mh l mh l l' n' r line l n fuse fuse g lg g' c x l mh l mh l load l' n' g' line l n fuse fuse g lg r 2m 1m cap c(x) 1a (mh) 2a (mh) 3a (mh) 4a (mh) 6a (mh) 8a (mh) 10a (mh) 0.1f 6.5 3.8 2.5 1.6 0.8 1.05 0.2 0.015f 1.9 1.5 1.1 0.8 0.6 * 0.3 0.1f 3.7 2.7 1.8 1.3 * * 0.3 0.1f * 4.2 * 1.7 * * * 0.047f 4.6 3.4 2.5 1.4 6.0 * 0.3 0.033f 9.5 4.3 1.8 1.2 0.85 * 0.3 0.22f 6.5 4.0 2.5 2.0 0.8 1.05 0.3 0.047f 10.5 4.0 1.2 0.9 0.53 * * 0.033f 5.0 3.7 * 1.1 0.6 * 0.2 medical applications, select attenuation code with corresponding component values from the table. cap c(x) cap c(y) 1a (mh) 2a (mh) 3a (mh) 4a (mh) 6a (mh) 8a (mh) 10a (mh) 0.1f 2200pf 6.5 3.8 2.5 1.6 0.8 1.05 0.2 0.015f 3300pf 1.9 1.5 1.1 0.8 0.6 * 0.3 0.1f 3300pf 3.7 2.7 1.8 1.3 0.8 1.05 0.3 0.1f 1000pf 10.5 4.2 2.5 1.7 1.05 * 0.3 0.047f 3300pf 4.6 3.4 2.5 1.4 0.9 * 0.3 0.033f 3300pf 9.5 4.3 1.8 1.2 0.85 * 0.3 0.22f 2200pf 6.5 4.0 2.5 2.0 0.85 1.05 0.3 0.22f 3300pf 6.5 4.0 2.5 2.0 0.85 1.05 0.3 0.047f 2200pf 10.5 4.0 1.2 0.9 0.53 * 0.3 0.033f 2200pf 5 3.7 1.8 1.1 0.6 * 0.2 * * 10.5 6.5 2.5 2.7 1.05 * 0.3 ? contact pdi for attenuation numbers ? flange mount only * contact pdi for availability - - 01 q 1 5 1 hgn-367a 74 145 algonquin parkway, whippany, nj 07981 ? 973-560-0019 ? fax: 973-560-0076 e-mail: filtersales@powerdynamics.com ? www.powerdynamics.com
|
